Tilt Pad Journal Bearings
The T series tilt pad journal bearings are 5 pad bearings that can be operated as load on pad or load between pad. They are manufactured from precision machined carbon steel housings, steel backed journal pads and typically aluminium end covers.

The clearance of each bearing assembly is accurately set and the lift or bump distanced checked against a dummy shaft.
In direct and direct lubrication can be used with T series journal bearings. The indirect lubrication uses 5 oil holes drilled between each pad to allow good oil flow through the bearing. In the direct lubrication (low loss) configuration oil nozzles between each journal pad directs cool oil flow directly onto the shaft.
Part Number | d1 | d2 | d3 | L1 | L2 |
---|---|---|---|---|---|
KCT.5P.050X035 | 50 | 95 | 92 | 35 | 40 |
KCT.5P.060X042 | 60 | 120 | 106 | 42 | 47 |
KCT.5P.070X049 | 70 | 130 | 118 | 49 | 54 |
KCT.5P.080X056 | 80 | 139 | 130 | 56 | 61 |
KCT.5P.090X063 | 90 | 165 | 152 | 63 | 69 |
KCT.5P.100X070 | 100 | 177 | 164 | 70 | 76 |
KCT.5P.110X077 | 110 | 190 | 176 | 77 | 83 |
KCT.5P.120X084 | 120 | 215 | 188 | 84 | 90 |
KCT.5P.140X098 | 140 | 228 | 212 | 98 | 105 |
KCT.5P.160X112 | 160 | 266 | 245 | 112 | 119 |
KCT.5P.180X126 | 180 | 298 | 278 | 126 | 134 |
KCT.5P.200X140 | 200 | 336 | 302 | 140 | 148 |

Instrumentation
KCEB can offer bearings either machined ready for thermal sensor installation or we can supply bearings already fitted with thermal sensors to suit your requirements.

Performance Analysis
For any application KC Engineering Bearings can perform oil film finite element analysis to accurately predict the performance of bearing for safe operation and also to determine power loss, oil flow rates, peak oil temperatures etc. Stiffness and damping coefficients are provided to allow for rotor dynamic modelling to be carried out for your application.